iASUS XSound 3 High Definition Helmet Speakers (Made for iASUS throat mic headsets, smartphones, and portable music players)


Free Shipping Included! iASUS XSound 3 High Definition Helmet Speakers (Made for iASUS throat mic headsets, smartphones, and portable music players) by iASUS Concepts at Race Review Online. MPN: IAXS3. Hurry! Limited time offer. Offer valid only while supplies last. Includes: XSound 3 High Definition Helmet Speakers 1 Pair of Velcro adhesives 2 Foam covers 2 Comfort fit covers 4 Foam spacing pads 3.5mm extension cable Ear unfolding pad Specifications: Driver size: 45mm Thickness: 0.99cm (0.39'')  Wires:Right wire - 20cm (7.9'')Left wire - 40cm (15.8'') Maximum Power: 25mW Impedance: 0 Ohm Frequency Range: 20Hz-22kHz Sensitivity: 125dB Weight: 34g (1.2oz) Volume: Vary when used with Bluetooth motorcycle headsets. Volume level depends on your headset and


iASUS XSound 3 High Definition Helmet Speakers (Made for iASUS throat mic headsets, smartphones, and portable music players) by iASUS Concepts
4.5 out of 5 stars with 48 reviews
Condition: New
Availability: In Stock
$119.00


Quantity:  

 


Product Description & Reviews

Includes: XSound 3 High Definition Helmet Speakers 1 Pair of Velcro adhesives 2 Foam covers 2 Comfort fit covers 4 Foam spacing pads 3.5mm extension cable Ear unfolding pad Specifications: Driver size: 45mm Thickness: 0.99cm (0.39")  Wires:Right wire - 20cm (7.9")Left wire - 40cm (15.8") Maximum Power: 25mW Impedance: 0 Ohm Frequency Range: 20Hz-22kHz Sensitivity: 125dB Weight: 34g (1.2oz) Volume: Vary when used with Bluetooth motorcycle headsets. Volume level depends on your headset and if it has sufficient wattage to drive them. Not enough wattage can damage the XSound 3 drivers. For increasing volume, add our EAR3 mobile amp to your setup.Design: Sleek, lightweight, acoustically tuned chassis CNC-machined from high grade aluminum.Performance: The 45mm drivers project the fullest and clearest sounds possible, rivaling many of the best full-sized headphones on the market.Custom Fit: For mounting in helmet ear pockets, the XSound 3 is required to be touching the ears and centered on them to sound the best. The included foam spacing pads fit to help eliminate audio degradation from wind and engine noise.Durability: The XSound 3 is equipped with the Kevlar-reinforced wires to withstand 10 lbs of pulling tension in demanding scenarios.Compatibility: Designed and tested to be used with iASUS throat mic headsets and mobile amplifiers, iASUS Stealth Bluetooth headset, smartphones and portable music devices. Refund Policy: We do not offer refunds on used items, as well as unopened and unused items 30 days after delivery of order. Returned items that are unused and unopened will be charged a restocking fee of 20% and shipping will not be refunded.

Features & Highlights

  • Customers have used the XSound 3 helmet speakers with their Arai helmets, Shoei helmets, HJC helmets, Schuberth helmets, Nolan, AGV, Icon helmets, Scorpion, Bell, Shark helmets and more.
  • The XSound 3 helmet speaker has a 3.5mm pin plug. It is compatible with most iPhone, Android, Samsung, Filo, EAR3, and bluetooth comm systems like Sena, Cardo
  • 45mm drivers tuned for a thin lightweight aluminum chassis (0.99cm/0.39" thin, 34g/1.2oz)
  • Varied length Kevlar-reinforced wires stands up to 10lbs of pull. Left wire - 40cm and right wire - 20cm for clean install.
  • Designed for premium sound quality. For volume gains, include the IASUS EAR3 Mobile Amp to your audio setup.

Additional Information

Brand:
iASUS Concepts
Manufacturer:
iASUS Concepts Ltd.
Category:
Speaker Systems
Model:
IAXS3
MPN:
IAXS3
UPC:
639738992068
EAN:
0639738992259
Part Number:
IAXS3
Publisher:
iASUS Concepts Ltd.
Binding:
Electronics
Item Weight:
0.25 pounds
Package Weight:
0.25 pounds
Package Size:
5.7 x 1.3 x 5.7 inches

 


Have questions about this item (IAXS3), or would like to inquire about a custom or bulk order?


If you have any questions about this product by iASUS Concepts, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


GoHawk AN4-X 2-Channel All-in-One Amplifier 4.5" Full Range Waterproof Bluetooth Motorcycle Stereo Speakers Audio Amp System w/AUX for 7/8 to 1.25" Handlebar Harley Cruiser Can-Am ATV RZR Polaris
mpn: GH084, ean: 0733074173348,
============ 1. High-Performance Speaker Size : 4.5'' W x 5.5'' L. Please make sure you have enough of room and clearance to install BEFORE purchase. 2. This bundle includes a set of (2) mounting clamp that supports 7/8'' to 1-1/4'' handlebar. 3. Bu...

Jensen JDVD1500 AM/FM/CD/DVD/BT/Front Aux-in
mpn: JDVD1500, ean: 3606331719696,
Our hands on Engineering Research and Development team builds quality into our JENSEN Marine products from the beginning by expertly designing each product from the ground up and validating all designs through extensive testing that is primarily cond...

Hogtunes Tweeter Pod Speaker Dash Kit for 1996-2013 Harley-Davidson Electra Glide, Classic, Ultra Classic, Street Glide and Trike models - HF-1
mpn: HF-1, ean: 0634211941168,
HOGTUNES TWEETER POD 98-09FLHT/X HF-1Fits: 1998+ Harley FLHT Electra Glide / FLHX Street Glide & FL Trike models. Doubles as a fairing accent piece with decorative chrome trim (included). Pod comes ''satin black'' to match stock inner fairings. Dis...

Metra OH-DIN01 6.5" Overhead Speaker+Receiver Enclosure Polaris RZR/ATV/UTV/Cart
mpn: OH-DIN01, ean: 0086429320332,
Features: Metra OH-DIN01 6.5'' Overhead Speaker + Receiver Enclosure Polaris RZR/ATV/UTV/Cart Easy Install Automotive-Marine Grade ABS With UV Single-DIN Radio Cut Out Water Resistant Accommodates One Radio Device and Two Speakers Paintable For Custo...



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - racereviewonline.com. All Rights Reserved.